mp3 player open pattern in headset

If you happened to encounter this type of problem " mp3 player open pattern in headset " this solution can help you.

All you have to do is connect like the picture I provided below.  I am sure you will ask how I found the right connection? right?  Easy!  All you have to do is turn on the mp3 player and input the headset.  Carefully, using  tweezers connect the open pattern to any part of the headset jack and listen which will give the best audio output to your headset.

See the picture below:

You may like: Basic Electronics tutorial

Unknown, Friday, February 17, 2012 Go back to Electronics Tutorials

NEXTBASE DVD player no power tutorial

NEXTBASE
MODEL:NB-785
DVDPLAYER
No power problem and solution.

Initial Troubleshooting:

1.  Totally deadset unit.

2.  There is an output voltage at the filter caps 350V.

3.  No DC output voltage like 9V and 5V this means that there is a problem in the smps circuitry.

4. I visually inspect the board and I found out that there is a burned resistor near the filter capacitor.

5.  Using ohmmeter I test the 220k ohms resistor but it was infinity open circuit.

6.  I replace it and test the unit and it works like a charm.  DVD is working and it is playing now my favorite audio CD.

See the picture below:

You may like:  Electronics training course

Unknown, Thursday, February 16, 2012 Go back to Electronics Tutorials

Electronics Training Course

Are you just starting your career?  Are you fun with gadgets, cell phone, computers, Ps2?  Are you thinking how are all of these work?  Then Electronic training course is just the right career for you.  See what you will learn in this study.

Practical electronics training course

The first part of this Electronics training will tackle all the basic electronics component you will found in any electronics gadgets, appliances, radio etc. You will master all of them in quick and in simple ways even a grade school student can understand.

You will study all the different electronics terminology you will encounter in troubleshooting any electronics equipment or appliances. First you will be given simple and comprehensive theory about the Current, Resistance, Voltage. It will introduce to you the different electronics component like Resistor, Capacitor and Battery.

You will learn the difference between the Direct Current Voltage (DCV) to Alternating Current Voltage (ACV). Transformer will also be taught in this electronic training course. The different characteristic in a electric circuit like reactance, impedance and Inductance.


Later in your study you will about semiconductors. It will introduce to you the different components like the transistor and diodes. Finally you enhance here your skills in soldering or this is the great time to learn the proper way of soldering electronics components.

Every tutorial here are done in a very easy to understand way.

A bonus in this electronics training course are "ABC's Of Radio Waves And Antennas", Learning Ohms Law seems to be a bit of an issue when it comes to learning basic electronics, All the electronic terms you need to know from A to Z,Special Book On The Crystal Set Radio, Fun Electronic Projects.

There is a lot more in store in this basic electronics course.

Start now your Electronics training course

Unknown, Monday, July 11, 2011 Go back to Electronics Tutorials

Welcome to Electronics Tutorials

In this blog I will compile all my tutorials about electronics from the very basic to advance.  I will try to explain the theory behind every electronics components.  You will learn how to identify it.  You will learn how to test and measure.  Later on there will be tutorials about troubleshooting electronics components found in every consumer appliances and even gadgets.

Unknown, Friday, July 8, 2011 Go back to Electronics Tutorials